https://thegreatmodel8.net/

I believe I may have the simple solution to the butt stock problem. The issue is actually with the stock. Mine was very difficult to get off. When I examined it I found the metal had deposited some type of black material. This does not belong there. I very caerefull sanded with a very finr grit bein...

I cannot get the bolt holding the stock to seat. Any suggestions?

Got it! Many thanks my friend for putting up with such an obvious novice, awesome gun awesome site.

I think you are on to something with the magazine. When I look inside to see where I am hung up it appears it is the magazine hanging up but I can't be certain. I am able to slide the assembly forward into the slots but only ath the assemble being held at an angle.

I actually never took the trigger assembly apart with the exception of removing the clip. I have cleaned them and put them back together. The problem now is I can't get the triggerassembly, including clip back into the chamber.

I used the video to dissassemble. As far as I can see, the assembly in the chamber is correct. When I try to insert the trigger and magazine I can get it to seat in the front or the rear. It is hung up somewhere in the middle. I have tried with the trigger in both the open and closed position, it is...

I have for the first time disassembled and cleaned my 81. It has been a learning experience to say the least. I am now at the end and stymied. I can't get the trigger and magazine assemble back into the chamber. Any suggestions?

Where can I get a reproduction of the spanner wrench?

Wher can I purchase the correct ammo for my 35 cal 81?