https://thegreatmodel8.net/

Hibby83

Glad you got it figured out and that it wasn't a broken coil spring. I believe the stamping worry you have is just an employee at Marbles years ago that didn't strike it centered. I have never taken a peep apart. I would not suggest doing so unless you know what you're doing "seeing breakdown/s...

Hibby83

canuck2 wrote: ↑Thu Jul 09, 2026 6:12 pm Similar but a bit simpler to come to kanada - long process though.
Stay tuned fellas

Staying tuned.!.!.
Looking forward to it.

Kanada

Hibby83

Good evening. With downward pressure on the tower portion of the peep, use your fingernail to pull the little tab "circled in photo" away from the peep tower. It will then want to spring upright. When you want the peep stowed* away, apply the same steps, depress tower and then push tab in ...

Hibby83

viewtopic.php?t=6345&sid=a766925fd80038 ... 12dd0e68a2

cantgrowup- you can find his email information in this post.

Hibby83

Hard to tell if thats an original bushing held in by the pin. Some parts are hard to come by. Seems most gun strippers dissaemble everthing down. Your rifle was Jack's "serious collector/forum member" first early serial numbered autoloader. He also owned serial 59, I never saw that one com...

Hibby83

Very much appreciated. So if I am reading correctly, the main items needed for the switch would be the 300 Savage barrel and bolt with extractorand possibly the feed lips will need tweaking. The bolt and extractor may require some fitting. All other parts such as springs barrel nut and lock washer ...

Hibby83

The bolt carrier* is the same for all cartridges. The bolt for 300 savage has a larger face* opening. The supporting springs and other pieces along with extractor for 35 rem and 300 are the same. 35 Remington and 300 Savage share the same exterior barrel dimensions. Fitting may* be required for the ...

Hibby83

Here's internet photos showing the difference between large caliber and the 25 remington spring. 25 rem is the bottom example.

Hibby83

Welcome to the forum. You're in the right place to learn about the autoloaders.

It seems that your rifle has the bigger cartridge buffer spring. The 25 Remington buffer can compress by hand.

I'd personally recommend 117 grain bullets, generally speaking 87 or higher.

Hibby83

In no way do I discourage making what you want.

The 25-30-32 cartridges can be changed back and forth easier.

If you search 7.62x39 you'll find traffic on the page with talks about that.

Hibby83

The autoloaders had 3 different bolt sizes for the cartridges, along with there being different extractor and spring differences among the cartridges. Even the feed lips on the magazine may need tuned*. Bolt size 1- 25-30-32 Remington 2- 35 Remington 3- 300 Savage It's possible to change a rifle fro...

Hibby83

Wish I had known you needed front and rear.

I'd contact the seller asap. He still has a front and rear pair available.

Hibby83

Perhaps I was mistaken. My understanding explained below. I received a couple barrels and shrouds as a lot*. The one barrel has some movement where it meets the extension. From what I've seen on the forum it's a uncommon fault on these rifles. I have the pin pointed out in the one photo, along with ...

Hibby83

https://www.gunbroker.com/item/1186837552

Hibby83

Thank you. That link goes to a 30/32 spring. I need a 35. Also, any idea where to get the bolt recoil spring? I’d imagine the buffer spring is still good. Anyone have measurements (length) of a new buffer spring? Scroll down and click on seller's other items. Look through the other items and you'll...

Hibby83

Ran across a short video on YouTube this morning. I'd sure like to give a Crack* at messing with that rifle.!.!. Against my instincts, possibly best to let a sleeping dog lie. Unknown how compromised the rifle is/difficult taking down would be for that optioned out autoloader. https://youtube.com/sh...

Hibby83

I refenced the Henwood book and saw no mention of the barrel and the extension troubleshoot/fix.

On page 186 I saw talk of the barrel shroud becoming loose.

Hibby83

Late model FBI rifles were brazed in the threads solid at the receiver end to prevent this very thing. Lots of rounds have a tendency to loosen the assy. Phyrbird- True about the the late fbi shrouds being brazed. There's a few things that can happen with high round count on these autoloaders. I be...

Hibby83

Hello OldWarrior. The barrel extension threads onto the breech end of the barrel and is pinned. With a keen eye you'll see the pin on the same side that the cartridge stamp is. You could get an appropriate sized punch and give the pin a hell of a whack to mushroom it out to stop the extension wiggle...

Hibby83

DoubleCanister, very nice addition! Original stock set. That style of buttstock is rare, you don't see them very much. What is the gun chambered in, I'm guessing 35 Rem.? Have you removed the buttstock and looked at the serial stamp on the wrist yet? That's another great way to tell originality to t...

Hibby83

https://thegreatmodel8.net/?page_id=1855

Check out the downloads from the home page.

Hibby83

Sam. I don't have a diagram to show. Once you get the new 1 piece firing pin, it should come together fairly easy. First install the firing pin into bolt carrier. Appropriately line up the retention gap on firing pin, slide in pin "from the top" that retains firing pin to bolt carrier. Fir...

Hibby83

Can anybody tell what style/make of detachable mag modification was used on Sams gun by the photos" PAX https://thegreatmodel8.net/?page_id=659 Preview the link above. The gentleman selling should include more pictures to compare. It appears that this rifle was* equipped with a Peace Officer E...

Hibby83

Thanks for sharing a photo.

Yours is only the second picture "counting mine" that I've seen of the 3-piece firing pin. It's talked about in the Henwood book 3rd edition page #54.

Hibby83

Your firing pin looks like this?

Hibby83

Hello Sam. Sorry to hear about your issue. I'm sure that you don't plan on taking to the range until some bench testing is done, PLEASE consider that rifle unsafe for range use until you remedy the issue and do your testing safely. Are you using reloaded ammunition? Does the rifle appear original, o...

Hibby83

Thanks for sharing. Reminds me of the barrel nut tool a fellow forum member made using nut splitter.

Hibby83

Looked last night. Saw that they only have the 25-30-32 four and five round clips showing available.

Most 8mm Mauser steel or brass clips should work for 35 REM/300 Sav. Can typically find them at gun shows for cheap.

Good luck.

Hibby83

Check your message inbox.

Hibby83

You are looking for a set "front screw in shroud and rear screw in buttstock?" Traditional or fish hook type stud/swivel?

I can ask if he has any available.

Hibby83

Welcome to the forum.

Nice collection!

Hibby83

Good morning Jim. I can't comment on powder choice from what you listed. In my 300 SAV. I have used BLC-2 and standard 150 grain InterLock. The reloading books should help guide you to what works. For bullets- I would suggest only using the 150's, I have no idea the length of the other weights you h...

Hibby83

Here's the post about the red-dot mounts.

viewtopic.php?t=5620#p22017

Hibby83

Nice! Got another one on the way. :D Sounds like a good one, look forward to hearing more. The timeline of your story is similar to how I got my first 2. I went to a local gunshow while I had my first Model 8 in route to my FFL I put hands on an autoloader for the first time at that show. A nice old...

Hibby83

Welcome to the group!

What a cool gun! Is this your first Remington Autoloader?

Hope the local department comes up with the magazine for you. Looking forward to hearing and seeing more of this Special rifle.

Hibby83

Mr. CAT, hope you have friends south of the border to help you out.

81POLICE- Thank you. Happy to be part of the group!

Hibby83

Sounds good, you're welcome! Going for a smooth or special type metal grip cap? I've got to see 54Bullseye's 81 high grades, they all had the same type of grip cap I posted. Dimension may* have been slightly different, cant confirm. Please post 'em up in time. I'm certain you won't encounter any obj...

Hibby83

Here's the measurements.

I didn't mention in the prior post, your stock set looks beautiful. Looking forward to see the progression.!.!.

Hibby83

Mr. Cat

Here's my 1946 date, 20 gauge SKEET grade Remington Sportsman "Model 11."

I'll get measurements this eve and post up.

There are good looking reproductions out there. I'm not sure if this fits the bill of what you're lookin for.

Hibby83

54bullseye John- I want to thank you and Brenda again for your hospitality! I'm happy you invited me up and introduced me to your family. You're welcome for the help, I felt privileged to assist tear down/clean up of that special rifle. 1913Model8 TJ- Your tool worked great. I knew it was a quality ...

Hibby83

Yes- European.
Claw mounts. A precision fit, detachable scope setup.

They've always piqued my interest. I don’t own a firearm with them.

Hibby83

Nice writeup 81POLICE. Appreciate all the pictures and putting it up on the homepage.

Hibby83

Nice score on the rifle!

That's an interesting front sight, I have never seen it before. I watched that auction, the sight setup is intriguing with the long radius. I imagine a standard peep aperture would thread into it.

Hibby83

81police wrote: ↑Wed Mar 11, 2026 2:56 pm jaw dropping score

I wrote an article on this guy and his gun. I'd love more photos!

81POLICE- I'd love to read the article. Where can I find it?

Hibby83

Good morning gents. I followed this auction the last couple days, it ended this morning. Congratulations 54Bullseye.!.!. I'm looking forward to some photos once you get this in hand. I referenced the third print of the John Henwood book page 115. I'm trying to track down photographs online of John H...

Hibby83

Nice pictures Dan.

Great to see you made the set! If I was to purchase another 1900, I'd want it to be without the rib.

Seeing the 1st and 2nd generation checkering- If i were a betting man I'd believe the buttplates are differ also.

Hibby83

Long Recoil wrote: ↑Mon Feb 16, 2026 1:57 pm I emailed you.

I emailed you back, beginning of the month. Check your spam folder. Sending another email now.

Hibby83

629-1. Purchased it new in 1983 if I remember correctly. Non pined barrel and chambers are not recessed like the very first ones. Had it tapped back in the 90’s for a red dot and might be putting on a new style one soon. Burris fast fire 3’s are going pretty cheap these days and I know that I can h...

Hibby83

Nice shot Tony!

What model is the wheel gun?

Hibby83

Good afternoon Long Recoil.

I might be interested. Here's my email, share pictures. Luke.hibbler83@gmail.com

I have the correct step elevators that goes with 81 sights I figured if I was trading for equal condition 8 rear sight, it was easier to keep my elevator.

Thanks.

https://thegreatmodel8.net/

The only place on the web, dedicated to these great rifles!

Search found 653 matches