https://thegreatmodel8.net/

9.3shooter

Had a chance to handle this model 30 yesterday at the LGS, now 2 weeks of state jail time to bring it home. Rifle looked great in all ways. I have a vintage Redfield peep sight ready to screw on.
Should be a good shooter.

9.3shooter

Beautiful!!

9.3shooter

Yes, had to pay a bit more than planned but it should be a funner. Looking forward to it. Thanks!

9.3shooter

A couple of mentions of wanting a Model 30 in .35 Rem...

https://www.gunsinternational.com/guns- ... =103292375

9.3shooter

These laws are much easier to pass than to rescind. We are facing the same BS here in WA state. state govt is heavy dem, we havent had a Republican Gov here since the 1980's! One dem after another.

72 here and dont see myself moving again.

9.3shooter

Yep and both the gun thing and the gas tax are still with us having survived several challenges. So much for getting help in the courts. At this point it will take a major ruling from SCOTUS to correct things and I aint gonna hold my breath. Since that time WA has now also passed a new law that will...

9.3shooter

EK,,,,October of 1941, just before the war.

9.3shooter

Another pic

9.3shooter

I picked up my new to me Remington 141 in .35 Remington today after a 2 week waiting period, yes we have that in Washington for all firearms now. Its seems to be in really good shape in and out, the two halves came apart nearly by gravity alone, clean inside. Numbered steel buttplate that when I too...

9.3shooter

Has anyone tried using those long squeeze handle clamps, maybe using the trigger guard and squeeze off the butt?

One could use a C clamp on the tangs or anything really to hold them together while squeezing the stock into place with the long clamp.

9.3shooter

Maybe I just got lucky!

Minnesota Dan, you have a Unicorn 81 in .25 Remington? Have never seen one listed anywhere. A rare find!

9.3shooter

Is this more a problem with the 81 as to the 8? I have two 8's right now, a .25 and a .32. The .25 has an aftermarket buttstock, but the .32 is original to the rifle, still has the SN in the tang slot. Having never had the stocks off before I decided to have a go at it. The .32 was on real good! I g...

9.3shooter

I did snag a 141 in .35 Rem recently and got to handle it at the LGS yesterday, seemed to be in pretty fair shape, decent bore at least as well as I can tell in the shop. 24" barrel, way better than average figure in the wood. I look forward to shooting it, be about 16 days though with the 10 b...

9.3shooter

Also after a good soak, and some heat, give it a couple of good whacks on the end with a block of wood, axe handle or similar to wake it up.

9.3shooter

I have a good shooting 8 in .25 Rem, with an after market butt stock. Works fine and fits well, but just doesnt look right especially with an original forearm.

Could work a trade or cash.

TIA

9.3shooter

Am a fan of the pump guns and the .32 Rem, currently own a model 8 in .32 and a .25 as well.

I did once have a 141 in .32 and I recall it shot well, but the Rem 8 probably a little better.

Been working on getting a 141 in .35 Rem, have everything I need but the rifle! Will soon rectify that.

9.3shooter

I seem to remember reading somewhere, maybe here, maybe in the Model 8 book, that when a Model 8 was sent to Rem for repairs, in the time when the 81 was in production, that they might upgrade that model 8 to an 81 configuration.

Sound plausible or am I misremembering things in my aging brain?

9.3shooter

What a beautiful rifle!

9.3shooter

Nice rifle, cant beat the price.

9.3shooter

https://www.gunbroker.com/item/1035930245

9.3shooter

It looks awful.

9.3shooter

The washers seem to be made of unobtanium! I am still looking as well. I have asked at least a dozen or more online parts sellers, no luck.

9.3shooter

Closes in 4 hours. https://www.ebay.com/itm/256368135188?hash=item3bb0bb4c14:g:-RgAAOSw0htlmg-N&amdata=enc%3AAQAIAAAA4Amd84kIaW7O4SCUHb81HGzoQAumOGwvMT4RgZVcuSoBdU0C2v4vb9tWUmEJr7bQkIQvEIAs0zbQlBa0oX0%2FL4%2Fe8fqk%2FluTK7HXxj%2FLx3Z4usqDUdnej%2F8%2FDfmbYQTn8zqAz%2ByumYVz9oOI9qh0UrZfybAiI36WvKP93...

9.3shooter

Looking for a Model 8 butt stock in good condition. My .25 Rem has an aftermarket stock that fits fine but just doesnt look right on such an old rifle.
It could be traded for with that stock or other parts or money.

PM if you have anything.

Thanks

9.3shooter

https://www.gunsinternational.com/guns- ... =102557473

Thought you guys might like to see this.

9.3shooter

It took me a long time to warm to the .32 cal, (except for 8mm ) and before this rifle I had a Remington 141 pump gun in this cal and also still have a Winchester 94 Canadian Railroad Comm. rifle in .32 Win Special that I like.

9.3shooter

Took the range again today, this time loads using IMR 4895, same Speer bullet. Also now wears a Lyman tang sight with the folding inner peep, works great.
Loads at 50 yds varied from an inch to maybe 1.5". This is a sweet shooter!

9.3shooter

I had the same thoughts, as long as one can look past the holes, its all good.

9.3shooter

I looked at several manuals, both old and newer and the highest charge I saw for the 170 Speer with 3031 was 34 grs and I only went to 30gr. Best load accuracy wise was 28 and 29 grs. As I have no hunt plans for this rifle, I have no need to push it. I started at 26 grs and that ran the rifle just f...

9.3shooter

I think I saw some of the FTX bullets the other day somewhere, they would be a good thing to try. I used the Speers here initially because they are semi pointed and the others I have are Hornady RN and I use those in my Win 94 Canadian Railroad Cenn. rifle where the RN is needed. Its one of the beau...

9.3shooter

Got some range time today with this old rifle. This is the one I lost the washer on but I stole the one out of my .25 and used it here and it works fine in both rifles. I had a handload worked up with 170 gr Speers and 3031 powder. Took me about 10 rounds to get the sights on at 50 yards, first shot...

9.3shooter

I will probably stumble over it when it no longer matters, thats how things go, LOL

9.3shooter

Barrel code shows Nov 1929 make. Here is a pic of it.

: IMG_3933.JPG (245.21 KiB) Viewed 24188 times

9.3shooter

Swapped out the washer from my .25 cal rifle for now, so at least I can take it to the range, but for sure will need a washer so if anyone has one to spare let me know, can purchase or trade Rem 8/81 parts for it.

Hate having to rob parts off one gun to make another one work!!

9.3shooter

I didnt notice those grooves up forward, once I saw the Swiss cheese I lost interest. Were it mine I would just plug the holes and shoot as intended.

I suppose the price is OK for what it is, but those holes....

9.3shooter

Cant tell for sure about the face marks, but the dont look like cracks. My first of these rifles was an 81 .300 as well. I didnt have it long, just something about the Savage round that never interested me. I have a .25 Rem and a just acquired .32 Rem. Cant help with the safety. Is there a particula...

9.3shooter

https://www.gunbroker.com/item/1015317107

Remember recently when Tony Blinken winced when POTUS called Xi a dictator? He winced such that he looked pained, like someone hit him.

I felt like that when I saw this beautiful rifle butchered. Great price and I was getting exited but....

9.3shooter

Yeah I spent quite a bit of time last night and today doing just that, no luck. Checked with several parts sellers, same, NADA.

I have a friend willing to try to make one, but would much rather have the actual part.

9.3shooter

Got it apart today, hardest thing to bust loose was the bushing. Soaked all night in PB Blaster and still took heat and muscle to break it loose. Barrel nut was easy, but as I mentioned in another section and in the Want to Buy, I lost my nut washer, it spun off into the garage somewhere, I will kee...

9.3shooter

Lost mine today, need a barrel nut washer for a .32 cal. My barrel nut has 25 teeth. I have some odds and ends of parts for trade or just purchase if you have one let me know.
Have a .35 cal washer to trade, too big for the .32 cal barrel.
TIA

9.3shooter

Was putting the new to me .32 Rem back together and neglected to have a means of capture, and of course it all got loose from me and I lost the barrel nut washer. Heard it land somewhere but so far no sigh of it, typical. I have a spare but I guess it must be for the .35 cal barrel, as its bigger in...

9.3shooter

Well its finally in my hot little fists! There is a mandatory 10 day wait for all semi auto's that I forgot about, since 2019! So it cleared and my dealer says they dont bother to notify buyers when they actually clear, but only when the 10 days are up. Total wait time was 15 days with weekends and ...

9.3shooter

Well I did the paperwork on the rifle on the 15th. With holiday and two weekends in between, tomorrow will be 10 business days. I was told that beginning in January, it would be a ten day wait for ALL guns in Washington, but this is still November and so far havent heard a word from my dealer about ...

9.3shooter

Yeah, still there. Overall condition is pretty ratty. Price is a bit high too for condition.

https://www.gunbroker.com/item/1007028913

9.3shooter

After months of looking I scored a model 8 in .32 last night on Gunbroker for what I hope will be a good price. Seller had it listed previously with no bids, then didnt relist for weeks. Meantime I kept looking and nothing else popped up other than one way over priced, refinished rifle and one 81 wi...

9.3shooter

Holy Smackerel!!!!!!!!!

9.3shooter

Wow! Beautiful rifle, congrats on the purchase!

9.3shooter

I was afraid it was gone, glad to see its still here!

9.3shooter

Oh I see. I misunderstood.

I wanted to let you know that there are currently 5 .25 Rems on Gunbroker right now for varying prices.

9.3shooter

Most unfortunate and bizarre to say the least. Glad CF refunded your money. Now to keep looking, which is at least half the fun anyway. When you do find a shooter, I think you will be a happy camper, I know I am. I bought one a couple years ago from a well known seller on Gunbroker and when asked to...

https://thegreatmodel8.net/

The only place on the web, dedicated to these great rifles!

Search found 171 matches