Howdy Fellars

Pitchy · Post by **Pitchy** » Sun Jun 21, 2015 4:49 pm

Still kicking pards, been a lot of water on the bridge since last here good and bad, good to see ya.

How about a little log sawing to start off with.

https://www.youtube.com/watch?v=sxL9JCU4wfU

https://www.youtube.com/watch?v=jzepjisDYSA

https://www.youtube.com/watch?v=Jgr4IgYNYfU

Sarge756 · Post by **Sarge756** » Sun Jun 21, 2015 5:10 pm

Good to hear from you again. I and others have wondered what had become of you. That sawmill is set up like one a good friend of mine has down here in N.Florida . He built a good sized house from the lumber that he made on that mill. Next time I`m out there I`ll take some pictures and post em. Sure ain`t stoppin by Home Depot for lumber is it?

Joe

Pitchy · Post by **Pitchy** » Sun Jun 21, 2015 5:23 pm

Thanks Joe, would love to see pictures of the mill.
Yep big savings in lumber alright, thanks for the welcome back.

Phyrbird · Post by **Phyrbird** » Sun Jun 21, 2015 7:04 pm

What a tinker, how do you get the belt to track on the tire?
I used to work in U/G coal mines;

I know what a chore tracking can be....

And how does the chip chain work? Looks cool.

Back to U: Lord help if it ever comes off. Our Fiendly neighborhood safety

folks (no acronyms mentioned) would go NUTS

I think the whole rig is innovative, just please be very careful. My Dad's 12" Mall Saw (handheld) kicks back like a mule. It's worm drive.

Pitchy · Post by **Pitchy** » Sun Jun 21, 2015 7:20 pm

Thanks, a old car tire has a crown to it which keeps the belt on, works great.
The sawdust chain has paddles on it and just carries it too the pile, fast huh.

Post by **81police** » Mon Jun 22, 2015 2:50 pm

Howdy Pitchy! Welcome back, been a long while!

Pitchy · Post by **Pitchy** » Mon Jun 22, 2015 3:42 pm

Thanks Cam

Bought a jon boat and been doing a little fishing.

Pitchy · Post by **Pitchy** » Tue Jun 23, 2015 5:46 am

How about some steam engines for a reaction.

Utube page.
https://www.youtube.com/channel/UCK9csi ... 5BeDsFwkZg

Post by **81police** » Tue Jun 23, 2015 7:09 am

good times!!!!

Adam Lee · Post by **Adam Lee** » Sun Jun 28, 2015 10:42 am

Glad to see you're having some fun fishing, making steam, and sharing the videos!

Adam

Pitchy · Post by **Pitchy** » Sun Jun 28, 2015 10:54 am

Thanks Adam, appreciate it.

ROBOPUMP · Post by **ROBOPUMP** » Mon Jun 29, 2015 8:23 pm

Glad to see you are doing OK. I was so disappointed to see that that the saw mill was not powered by a steam engine. Anyway, always inspired by your endeavers and that wife.

Pitchy · Post by **Pitchy** » Tue Jun 30, 2015 6:24 am

ROBOPUMP wrote:Glad to see you are doing OK. I was so disappointed to see that that the saw mill was not powered by a steam engine. Anyway, always inspired by your endeavers and that wife.

Thanks, steam would be fun but a hassle, I used to have a few oil field engines I wish I would of tried on it.
She`s a hard worker alright and a pretty good cook too.

https://thegreatmodel8.net/

The only place on the web, dedicated to these great rifles!

Howdy Fellars

Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars

Re: Howdy Fellars