Yes, back when my eyes were good !! LOL ! This is my 4th and final Flintlock that I made and by far my best. The wood was a solid plank of Curly Maple. The barrel is a Swamped Colerain 54 cal with round bottom rifling. The lock is made by Davis.
This was a labor of love. I gathered the parts and started it as soon as the paving season ended just before Christmas and pretty much spent the winter on it. Lots of hours !!!! Many days I would be in the workshop at 4 am then go into the night with breaks of course. It consumed me at the time and what came next was ALWAYS on my mind !
I shot a bunch of deer with it during both the Massachusetts and the Pennsylvania Flintlock seasons ! What a ball we had and boy I am glad I did it while I could because my eyes and knees wouldn't be up for it now LOL !!!!
I hope you enjoy it. John Taylor
Flintlock I made back in 2001
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Flintlock I made back in 2001
- Attachments
-
- IMG_7490.jpg (96.92 KiB) Viewed 9138 times
-
- IMG_7491.jpg (76.32 KiB) Viewed 9138 times
-
- IMG_7492.jpg (107.17 KiB) Viewed 9138 times
Last edited by 54bullseye on Thu Nov 24, 2022 5:13 pm, edited 2 times in total.
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
pics
- Attachments
-
- IMG_7493 (1).jpg (101.33 KiB) Viewed 9137 times
-
- IMG_7494 (1).jpg (117.77 KiB) Viewed 9137 times
-
- IMG_7495.jpg (108.76 KiB) Viewed 9137 times
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
pics
- Attachments
-
- IMG_7498.jpg (147.62 KiB) Viewed 9137 times
-
- IMG_7499.jpg (99.31 KiB) Viewed 9137 times
-
- IMG_7500.jpg (140.98 KiB) Viewed 9137 times
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
pics
- Attachments
-
- IMG_7501.jpg (89.95 KiB) Viewed 9137 times
-
- IMG_7503.jpg (80.79 KiB) Viewed 9137 times
-
- IMG_7504.jpg (353.25 KiB) Viewed 9137 times
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
last pictures. Thanks for looking ! John Taylor
- Attachments
-
- IMG_7505.jpg (90.51 KiB) Viewed 9137 times
-
- IMG_7506.jpg (382.71 KiB) Viewed 9137 times
-
- IMG_7507.jpg (305.75 KiB) Viewed 9137 times
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
One last picture. This is back when my eyes were perfect and I had a good steady hold !!! Three shot group off hand at 50 yards !! I had a good day 
Been on the refrigerator ever since.
John Taylor
Been on the refrigerator ever since.John Taylor
- Attachments
-
- IMG_7508.jpg (119.86 KiB) Viewed 9134 times
Re: Flintlock I made back in 2001
Great work and a fine looking flintlock John!
From the looks of the target you had the load and hold for match quality. Your quarry stood little chance.
Pretty cool you did some traveling for out of state hunts. I'd like brainstorm and make that happen for my neighboring states "ohio/new york/jersey
". I'm pretty much smack dab in the middle of Pennsylvania. My rifle opener is tomorrow.
From the looks of the target you had the load and hold for match quality. Your quarry stood little chance.
Pretty cool you did some traveling for out of state hunts. I'd like brainstorm and make that happen for my neighboring states "ohio/new york/jersey
". I'm pretty much smack dab in the middle of Pennsylvania. My rifle opener is tomorrow.-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
Shoot a giant tomorrow !!! Good Luck ! JohnHibby83 wrote: ↑Fri Nov 25, 2022 10:26 am Great work and a fine looking flintlock John!
From the looks of the target you had the load and hold for match quality. Your quarry stood little chance.
Pretty cool you did some traveling for out of state hunts. I'd like brainstorm and make that happen for my neighboring states "ohio/new york/jersey
Re: Flintlock I made back in 2001
Great work. Shows skill and patience. Would be grateful if my eyes had been that good ever and my hold that steady in offhand.
Good shooting, Joe
Good shooting, Joe
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
With seven hundred dollars and a thirty ought six."
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
From about 1996 through 2013 I shot a winter and sometimes summer muzzle loader league and we shot every other Sunday plus me and a few others shot at least once or twice a week on our own. I was putting the time in ! We also spent a lot of time on tuning the locks to make them fast !! That makes a lot of difference. That target was my best 50 yard target and believe me they weren't all like that
They were great years of shooting while I was on my game but now I need a scope !!!!
John Taylor
They were great years of shooting while I was on my game but now I need a scope !!!!
John Taylor
-
Ray Newman
- Posts: 8
- Joined: Sat Oct 19, 2013 9:28 pm
- Location: Between No Where & No Place, WA
Re: Flintlock I made back in 2001
Very good craftsmanship on the rifle build. You did well, very well.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
-
Bill in Oregon
- Posts: 42
- Joined: Sat Sep 05, 2015 3:56 pm
- Location: Nolan County, Texas
Re: Flintlock I made back in 2001
You did an incredibly good job on your long rifle. I hope you never lose pride in your craftsmanship. 
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
Thanks for all the kind words !! I really enjoyed making, shooting and hunting with it . John Taylor
-
Bill in Oregon
- Posts: 42
- Joined: Sat Sep 05, 2015 3:56 pm
- Location: Nolan County, Texas
Re: Flintlock I made back in 2001
You mean THE John Taylor who now lives in Lewiston and chambered and fitted a .44-77 barrel to a Husqvarna rolling block action for me last spring?
-
54bullseye
- Posts: 350
- Joined: Sat Jun 25, 2022 3:21 pm
Re: Flintlock I made back in 2001
Nope different guy ! I live in central Mass.Bill in Oregon wrote: ↑Sat Dec 10, 2022 2:13 pm You mean THE John Taylor who now lives in Lewiston and chambered and fitted a .44-77 barrel to a Husqvarna rolling block action for me last spring?
-
Bill in Oregon
- Posts: 42
- Joined: Sat Sep 05, 2015 3:56 pm
- Location: Nolan County, Texas
Re: Flintlock I made back in 2001
Well, now I know of two John Taylors with wonderful gunsmithing talent.