Page 1 of 1
30Rem and 32Rem brass
Posted: Thu Jul 07, 2016 5:12 pm
by GRUMPA
For you folks that can't find any here's your chance. These are made from "NEW" 38-55 Starline brass, so when a person receives them they're getting brand new brass, just converted. These do get annealed so when a person receives them all they need to do is load them up and go bang.
These are $1ea plus shipping.
Funds: USPS money order or cash only
Folks....I've been doing conversions for years, no matter what it is there's never been a problem.
Re: 30Rem and 32Rem brass
Posted: Sat Jul 09, 2016 9:06 am
by Sarge756
If they are as high quality as the 35Rem I got from you converted from mil. brass then they are well worth a buck each. There is interest here for 25Rem brass also. Are you making it or have plans to do so?
Thanks again for a quality product.
Joe
Re: 30Rem and 32Rem brass
Posted: Mon Jul 11, 2016 5:27 am
by GRUMPA
With the 38-55 brass I have I scraped out a good dozen trying to convert those into 25Rem. The 30 and 32Rem didn't have an issue being converted.
So the 25Rem I still do but those are made from Hydroformed 1x fired 30-30 cases.
Those 35Rem cases I do are made from Mil brass, much thicker and stronger brass. Those will last a person a long time and hold up much longer than factory fodder.
Re: 30Rem and 32Rem brass
Posted: Mon Jul 11, 2016 8:57 am
by Bandersnatch
I would be *very* interested in 30 and 25, if any were available.
Re: 30Rem and 32Rem brass
Posted: Mon Jul 11, 2016 10:16 am
by GRUMPA
All a person has to do is PM me with cal and quantity. The Rem cases I do all the time, meaning when I get requests for them I make them up as the request comes in. I always have the parent cases, always have, I just don't convert a bunch and have them sitting on the floor just collecting dust.
I did that on another conversion, the 256Win mag, that same parent case is used for the 351 WSL as well. So here I have a butt-load of 256W sitting and someone wants 351 WSL but I ran out of the parent case.